Electrical Panel Builder (All Levels)
Location: Torrance, CA
Pay Rate: $26–$48/hour
Job Type: Direct Hire- Full-Time Hourly
The Role
The Electrical Panel Builder assembles, wires, and tests custom industrial control and power distribution panels according to electrical schematics, wiring diagrams, and applicable codes and standards, including UL 508A and NEC. Working closely with the IC&E engineering team, you will take each panel from a bare enclosure to a verified build ready for factory acceptance testing (FAT). The panels you build will control and power reactors and facility systems. This role requires attention to detail, adherence to safety and quality standards, and the ability to work in a fast-paced manufacturing environment.
We are hiring at three levels and will determine placement based on your skills and experience:
$26–$32 per hour
Electrical Panel Builder: Builds panels from drawing packages with guidance from senior builders.$32–$40 per hour
Senior Electrical Panel Builder: Builds and tests control and power distribution panels independently and resolves design questions with engineering.$40–$48 per hour
Lead Electrical Panel Builder: Owns complex builds from kitting through FAT, adapts quickly as designs evolve, sets workmanship standards, trains other builders, and delivers completed panels ready for seamless field installation.
Key Responsibilities
Read and interpret electrical schematics, wiring diagrams, and panel layout drawings.
Mechanically assemble control panel enclosures, backplates, DIN rail components, wire duct, and other electrical components.
Wire control and power distribution panels, including PLC and remote I/O, power supplies, VFDs, and busbar systems.
Cut, strip, crimp, terminate, torque, and label wires according to drawings and workmanship standards.
Verify parts and materials against the bill of materials (BOM) and drawings prior to installation.
Perform continuity checks and point-to-point verification, and support panel testing and FAT.
Communicate drawing discrepancies, missing parts, or build issues to engineering.
Mark up drawings, maintain redlines, and implement engineering changes.
Maintain clean, organized enclosures and accurate build documentation.
Comply with safety policies, personal protective equipment (PPE) requirements, and lockout/tagout (LOTO) procedures.
You Will Be Successful in This Role If
You take pride in clean, consistent workmanship and check your own work before handing it off.
You build according to drawings and speak up when drawings, parts, or instructions don't match.
You're comfortable working with rapidly evolving designs, collaborating with engineers to resolve questions, and keeping redlines current.
You enjoy custom, one-off builds more than repeating the same panel.
You want to grow with a startup that is still developing its standards and processes.
Basic Qualifications
Experience building and wiring industrial control or power distribution panels.
Ability to read and build from electrical schematics, wiring diagrams, and panel layouts.
Hands-on experience with DIN rail components, terminal blocks, relays, contactors, breakers, power supplies, and VFDs.
Proficiency with crimpers, torque tools, label printers, and multimeters.
Working knowledge of electrical safety, PPE, and LOTO procedures.
Ability to lift up to 50 lbs. and work on the shop floor for extended periods.
Preferred Skills and Experience
Experience in a UL 508A panel shop or with a system integrator building custom panels.
Experience with busbar systems (Rittal or similar) and 480V/208V three-phase power distribution.
PLC and remote I/O wiring experience (Allen-Bradley, Siemens, or similar) and familiarity with 4–20 mA loops.
Panel testing, troubleshooting, and FAT experience.
Electrician training, trade school education, or electrical certification.
Forklift, scissor lift, or aerial lift certification.
INDH